Woodland Christmas Crochet Centerpiece with Trees and Foxes
Advanced
For experienced crocheters who enjoy complex shaping, fine detail, and ambitious construction
Weekend Project
A satisfying weekend make — start Friday, finish Sunday, enjoy forever.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Woodland Christmas Crochet Centerpiece with Trees and Foxes
This Christmas crochet centerpiece pattern creates a woodland holiday display with three snowy evergreen trees, two small fox ornaments, layered poinsettias, and a cream mat edged in burgundy and gold. A removable crochet sleeve surrounds a glass cylinder holding a battery-operated LED candle, bringing the separate pieces together into one table decoration.
The trees have shaped cone bodies and scalloped branch skirts, while the foxes include curved tails, embroidered features, cream chest patches, and fringed scarves. Dimensional flowers and embroidered foliage frame the front of the arrangement. The finished centerpiece measures approximately 50 cm across, with its tallest tree reaching about 32 cm including the star.
Allow approximately 45–60 hours for this advanced project. It suits crocheters comfortable with counted shaping, working into reserved loops, surface embroidery, and assembling small sculptural pieces. The instructions are an original interpretation of the woodland arrangement; dimensions and yarn quantities are estimates to confirm with a sample.
Materials
- DK yarn: approximately 650 m cream.
- DK yarn: approximately 450 m forest green.
- DK yarn: approximately 180 m burgundy.
- DK yarn: approximately 180 m burnt orange.
- DK yarn: approximately 45 m mustard gold.
- DK yarn: approximately 40 m olive green.
- DK yarn: approximately 25 m dark brown.
- Small amounts of black embroidery thread for fox eyes, noses, and mouths.
- Fine gold metallic thread, approximately 50 m, for surface accents.
- 3.5 mm crochet hook for the mat, sleeve, flowers, and scarves.
- 3.0 mm crochet hook for trees, foxes, stars, and leaves.
- Approximately 300 g polyester stuffing.
- Stitch markers, tapestry needle, scissors, ruler, and blocking pins.
- Washable fabric or felt for an optional mat backing.
- Glass cylinder approximately 10 cm outside diameter and at least 18 cm tall, with straight sides.
- Battery-operated LED pillar candle that fits freely inside the cylinder.
- Approximately thirty 6–8 mm gold beads for the trees, twelve gold beads for the flower centers, and two small gold bells for the sleeve bow.
- Burgundy ribbon approximately 1.5 cm wide: about 1.5 m total for four bows.
- Optional artificial berry sprigs and two small pinecones for removable finishing accents.
Abbreviations
chchainsl stslip stitchscsingle crochethdchalf double crochetdcdouble crochettrtreble crochetinc2 single crochet in one stitchdecsingle crochet 2 stitches together; use an invisible decrease on stuffed piecesMRmagic ringBLOback loop onlyFLOfront loop onlyststitchScalloped Display Mat
- Round 1, cream and 3.5 mm hook: work 12 dc in MR; join with sl st in the first dc. Pull the ring closed. (12)
- Round 2: ch 2, work 2 dc in every st; join. (24)
- Round 3: ch 2, repeat 1 dc, 2 dc in the next st twelve times; join. (36)
- Round 4: ch 2, repeat dc in the next 2 sts, 2 dc in the next st twelve times; join. (48)
- Round 5: ch 2, repeat dc in the next 3 sts, 2 dc in the next st twelve times; join. (60)
- Round 6: ch 2, repeat dc in the next 4 sts, 2 dc in the next st twelve times; join. (72)
- Round 7: ch 2, repeat dc in the next 5 sts, 2 dc in the next st twelve times; join. (84)
- Round 8: ch 2, repeat dc in the next 6 sts, 2 dc in the next st twelve times; join. (96)
- Round 9: ch 2, repeat dc in the next 7 sts, 2 dc in the next st twelve times; join. (108)
- Round 10: ch 2, repeat dc in the next 8 sts, 2 dc in the next st twelve times; join. (120)
- Round 11: ch 2, repeat dc in the next 9 sts, 2 dc in the next st twelve times; join. (132)
- Round 12: ch 2, repeat dc in the next 10 sts, 2 dc in the next st twelve times; join. (144)
- Round 13: ch 2, repeat dc in the next 11 sts, 2 dc in the next st twelve times; join. (156)
- Round 14: ch 2, repeat dc in the next 12 sts, 2 dc in the next st twelve times; join. (168)
- Round 15: ch 2, repeat dc in the next 13 sts, 2 dc in the next st twelve times; join. (180)
- Round 16: ch 2, repeat dc in the next 14 sts, 2 dc in the next st twelve times; join. (192)
- Round 17: ch 1, sc in every st; join. (192)
- Round 18: starting at the join, repeat skip 3 sts, 9 dc in the next st, skip 3 sts, sl st in the next st twenty-four times. The final sl st enters the first stitch of Round 17. Fasten off. (24 shells, each containing 9 dc, with 24 valley slip stitches)
- Round 19, burgundy: join in a valley slip stitch. Ch 1, sc in that valley; repeat sc in the first 4 dc of the next shell, 3 sc in its center dc, sc in its final 4 dc, sc in the next valley twenty-four times, omitting the final valley sc because it was worked at the start. Join and fasten off. (288 sc)
- Gold accent: loosely surface-slip-stitch along the burgundy round, placing one surface stitch over each sc. Keep the thread relaxed so the scallops retain their shape. Fasten off.
- Block the mat flat to approximately 50 cm across the scallop tips. Let it dry completely before adding decorations.
Three Evergreen Tree Cones
- Use forest green and the 3.0 mm hook. Make one large cone through Round 30, one medium cone through Round 24, and one small cone through Round 20. On Rounds 8, 14, 20, 24, 26, and 30, work BLO wherever that round exists; these front loops provide branch-skirt attachment lines.
- Round 1: 6 sc in MR. (6)
- Round 2: sc around. (6)
- Round 3: inc around. (12)
- Round 4: sc around. (12)
- Round 5: repeat 1 sc, inc six times. (18)
- Round 6: sc around. (18)
- Round 7: repeat 2 sc, inc six times. (24)
- Round 8: sc around in BLO. (24)
- Round 9: repeat 3 sc, inc six times. (30)
- Round 10: sc around. (30)
- Round 11: repeat 4 sc, inc six times. (36)
- Round 12: sc around. (36)
- Round 13: repeat 5 sc, inc six times. (42)
- Round 14: sc around in BLO. (42)
- Round 15: repeat 6 sc, inc six times. (48)
- Round 16: sc around. (48)
- Round 17: repeat 7 sc, inc six times. (54)
- Round 18: sc around. (54)
- Round 19: repeat 8 sc, inc six times. (60)
- Round 20: sc around in BLO. Finish the small cone here, leaving a sewing tail. (60)
- Round 21: repeat 9 sc, inc six times. (66)
- Round 22: sc around. (66)
- Round 23: repeat 10 sc, inc six times. (72)
- Round 24: sc around in BLO. Finish the medium cone here, leaving a sewing tail. (72)
- Round 25: repeat 11 sc, inc six times. (78)
- Round 26: sc around in BLO. (78)
- Round 27: repeat 12 sc, inc six times. (84)
- Round 28: sc around. (84)
- Round 29: repeat 13 sc, inc six times. (90)
- Round 30: sc around in BLO. Fasten off, leaving a sewing tail. (90)
Snowy Branch Skirts
- Work with each cone upright and its tip pointing away from you. Use the 3.0 mm hook. Add skirts at Rounds 8, 14, and 20 on the small cone; Rounds 8, 14, 20, and 24 on the medium cone; and Rounds 8, 14, 20, 26, and 30 on the large cone. Leave the large cone’s unused Round 24 loops bare.
- Green skirt round: join forest green in the first reserved front loop of the selected round. Ch 1; repeat sc in the next loop, skip 1 loop, 5 dc in the next loop, skip 1 loop, sc in the next loop, sl st in the next loop. Join to the first sc. Each repeat consumes 6 reserved loops and produces 8 stitches. The attachment rounds produce respectively 4, 7, 10, 12, 13, or 15 shells at 24, 42, 60, 72, 78, or 90 loops.
- Cream edging round: join cream in the first sc of a repeat. Ch 1; repeat sc in that first sc, hdc in the first 2 dc of the shell, 3 hdc in the center dc, hdc in its last 2 dc, sc in the following sc, sl st in the following sl st. Join and fasten off. Each shell repeat produces 10 stitches.
- Gently pull each skirt outward, allowing the cream edge to hang below the green shell. Keep all skirt joins toward the back of the tree.
Tree Base Disks and Closure
- Make one forest-green disk for each tree with the 3.0 mm hook. Stop the small disk after Round 10, the medium after Round 12, and the large after Round 15.
- Round 1: 6 sc in MR. (6)
- Round 2: inc around. (12)
- Round 3: repeat 1 sc, inc six times. (18)
- Round 4: repeat 2 sc, inc six times. (24)
- Round 5: repeat 3 sc, inc six times. (30)
- Round 6: repeat 4 sc, inc six times. (36)
- Round 7: repeat 5 sc, inc six times. (42)
- Round 8: repeat 6 sc, inc six times. (48)
- Round 9: repeat 7 sc, inc six times. (54)
- Round 10: repeat 8 sc, inc six times. Fasten off the small disk. (60)
- Round 11: repeat 9 sc, inc six times. (66)
- Round 12: repeat 10 sc, inc six times. Fasten off the medium disk. (72)
- Round 13: repeat 11 sc, inc six times. (78)
- Round 14: repeat 12 sc, inc six times. (84)
- Round 15: repeat 13 sc, inc six times. Fasten off the large disk. (90)
- Stuff each cone evenly, keeping the point narrow and the base broad. Pin its matching disk underneath. Whipstitch one disk stitch to one cone stitch around all 60, 72, or 90 pairs. Add the final stuffing before closing; the underside should remain flat.
Gold Tree Stars
- Make six star faces in mustard gold with the 3.0 mm hook, then pair them into three double-sided toppers.
- Round 1: work 10 sc in MR; join. (10)
- Round 2: ch 1, inc in every st; join. (20)
- Round 3: repeat the following five times: ch 5; working back along that chain, sl st in the second chain from the hook, sc in the next chain, hdc in the next chain, dc in the last chain; skip 3 stitches of Round 2 and sl st in the next stitch. The fifth attachment lands at the starting point. Fasten off. (5 points)
- Pair two faces with their wrong sides together. Sew their outlines together, matching all five points and adding only a pinch of stuffing at the center.
- Embroider a small gold center circle and a line from the center toward each point. Sew a star securely over the tip of each tree.
- Sew approximately ten gold beads to each tree, distributed between the snowy skirts. Tie one small burgundy bow around the front of each tree and stitch its knot in place.
Fox Bodies — Make Two
- Use burnt orange and the 3.0 mm hook. Each finished fox is approximately 14–16 cm tall including ears.
- Round 1: 6 sc in MR. (6)
- Round 2: inc around. (12)
- Round 3: repeat 1 sc, inc six times. (18)
- Round 4: repeat 2 sc, inc six times. (24)
- Round 5: repeat 3 sc, inc six times. (30)
- Round 6: repeat 4 sc, inc six times. (36)
- Rounds 7–12: sc around on each of these six rounds. (36 per round)
- Round 13: repeat 4 sc, dec six times. (30)
- Rounds 14–15: sc around on each round. (30 per round)
- Round 16: repeat 3 sc, dec six times. (24)
- Round 17: sc around. Begin stuffing, shaping a broad seated base. (24)
- Round 18: repeat 2 sc, dec six times. (18)
- Round 19: sc around. Finish stuffing and leave the neck opening unclosed. Fasten off with a long sewing tail. (18)
Fox Heads — Make Two
- Round 1, burnt orange: 6 sc in MR. This ring is the crown of the head. (6)
- Round 2: inc around. (12)
- Round 3: repeat 1 sc, inc six times. (18)
- Round 4: repeat 2 sc, inc six times. (24)
- Round 5: repeat 3 sc, inc six times. (30)
- Round 6: repeat 4 sc, inc six times. (36)
- Round 7: repeat 5 sc, inc six times. (42)
- Rounds 8–13: sc around on each of these six rounds. (42 per round)
- Round 14: repeat 5 sc, dec six times. (36)
- Round 15: repeat 4 sc, dec six times. (30)
- Round 16: repeat 3 sc, dec six times. Begin stuffing firmly. (24)
- Round 17: repeat 2 sc, dec six times. (18)
- Round 18: repeat 1 sc, dec six times. Finish stuffing. (12)
- Round 19: dec six times. Thread the tail through the remaining front loops, draw closed, and bury the end. (6)
- Mark two eye positions between Rounds 10 and 11, with 8 stitches between their centers across the face. Embroider two small black oval eyes, securing all ends inside the head. Add one tiny cream highlight to each eye.
Fox Muzzles and Chest Patches
- Make two cream muzzle ovals. Ch 7. Round 1: sc in the second chain from the hook and the next 4 chains, 3 sc in the final chain; along the underside, sc in the next 4 chains, then 2 sc in the final chain. Do not join. (14)
- Muzzle Round 2: inc in the first st, sc in the next 4 sts, inc in each of the next 3 sts, sc in the next 4 sts, inc in each of the final 2 sts. Sl st in the next st and fasten off with a sewing tail. (20)
- Center each muzzle below the eyes, with its upper edge approximately at head Round 12. Sew around the oval, adding a pinch of stuffing before closing. Embroider a black triangular nose at its upper center, then a short vertical line and two curved mouth stitches.
- Make two cream chest patches. Ch 10. Work sc in the second chain from the hook, hdc in the next chain, dc in the next 5 chains, hdc in the next chain, and 3 sc in the last chain. Along the underside, work hdc in the next chain, dc in the next 5 chains, hdc in the next chain, and sc in the last chain. Join to the first sc. (19)
- Fasten off with a long tail. Sew each patch vertically to the body front, with the narrow starting end toward the neck and the rounded end toward the seated base.
Fox Ears — Make Four Outer and Four Inner Pieces
- Outer Row 1, burnt orange: ch 2, sc in the second chain from the hook. (1)
- Outer Row 2: ch 1, turn, 3 sc in the stitch. (3)
- Outer Row 3: ch 1, turn, inc, sc, inc. (5)
- Outer Row 4: ch 1, turn, inc, sc in the next 3 sts, inc. (7)
- Outer Row 5: ch 1, turn, inc, sc in the next 5 sts, inc. Fasten off with a long tail. (9)
- Inner Row 1, cream: ch 2, sc in the second chain from the hook. (1)
- Inner Row 2: ch 1, turn, 3 sc in the stitch. (3)
- Inner Row 3: ch 1, turn, inc, sc, inc. Fasten off. (5)
- Sew one inner triangle to each outer triangle, aligning their broad lower edges and leaving orange visible around the upper sides. Pin two ears to each crown, spanning approximately head Rounds 3–7 on opposite sides. Curve their broad bases slightly and sew through all 9 base stitches.
Fox Legs — Make Eight
- Round 1, dark brown: 6 sc in MR. (6)
- Round 2: inc around. (12)
- Round 3: repeat 1 sc, inc six times. (18)
- Rounds 4–5: sc around on each round. (18 per round)
- Round 6: repeat 1 sc, dec six times. Change to burnt orange on the final stitch. (12)
- Rounds 7–10: sc around on each of these four rounds. Stuff the foot firmly and the upper leg lightly. (12 per round)
- Flatten the opening and sc through both layers across 6 pairs of stitches. Fasten off with a sewing tail. (6 joining sc)
- For each fox, sew two legs beneath the front of the body, with their feet projecting forward. Sew the other two at the lower sides, angled outward and partly hidden by the seated body. Stitch each flattened top edge securely to the body.
Curved Fox Tails — Make Two
- Round 1, cream: 6 sc in MR. Begin at the tail tip. (6)
- Round 2: sc around. (6)
- Round 3: inc around. (12)
- Round 4: sc around. (12)
- Round 5: repeat 1 sc, inc six times. (18)
- Round 6: sc around. (18)
- Round 7: repeat 2 sc, inc six times. (24)
- Round 8: sc around; change to burnt orange on the final stitch. (24)
- Round 9: repeat 3 sc, inc six times. (30)
- Rounds 10–14: sc around on each of these five rounds. (30 per round)
- Round 15: repeat 3 sc, dec six times. (24)
- Rounds 16–18: sc around on each round. Stuff the cream tip and widest section moderately. (24 per round)
- Round 19: repeat 2 sc, dec six times. (18)
- Rounds 20–22: sc around on each round. (18 per round)
- Round 23: repeat 1 sc, dec six times. Add a little stuffing to the narrow end. (12)
- Round 24: sc around. Flatten and sew the 12-stitch opening closed through 6 pairs, leaving a long attachment tail.
- Curve the tail around one side of the seated fox. Sew its narrow orange end to the lower back, then tack the inner curve to the body in three places so the cream tip rests near the front paw. Mirror the curve on the second fox.
Fox Scarves and Head Attachment
- Make two scarves in burgundy with the 3.5 mm hook. Row 1: ch 43, hdc in the second chain from the hook and each remaining chain. (42)
- Row 2: ch 1, turn, hdc in BLO across. (42)
- Row 3: ch 1, turn, hdc in BLO across. Fasten off. (42)
- Cut twelve 10 cm strands for each scarf. Fold and attach six strands to each short end, spacing them evenly; trim the finished fringe to approximately 2 cm.
- Center each head over the body’s 18-stitch neck opening. Pin it with the muzzle facing the chest patch, then sew every neck stitch to the underside of the head. Make a second securing pass around the neck.
- Wrap each scarf around its fox’s neck, cross the ends at the front, and tack the overlap with burgundy yarn. Leave the cream chest visible below the scarf.
Removable LED Candle Sleeve
- Use cream and the 3.5 mm hook. The sleeve is an open-ended tube approximately 11 cm high. Its target circumference is about 31.5 cm for a 10 cm diameter cylinder. For another cylinder, make a foundation chain in a multiple of 4 that fits comfortably around the glass without stretching.
- Round 1: ch 44 loosely and join without twisting. Ch 1, sc in each chain; join to the first sc. Try the ring on the cylinder before proceeding. (44)
- Round 2, burgundy: ch 1, sc around; join. (44)
- Round 3, cream: ch 1, sc around; join. (44)
- Rounds 4–20: ch 1, sc around and join on each of these seventeen rounds. Try the sleeve on the glass periodically. (44 per round)
- Round 21, burgundy: ch 1, sc around; join. (44)
- Round 22, cream: ch 1, sc around; join. Fasten off. (44)
- Embroidery layout: lay the sleeve flat without stretching and mark a front center. Using burgundy yarn, embroider an eight-spoke snowflake centered halfway between the burgundy bands. Make four straight lines crossing at the same center, each approximately 6 cm long.
- Branch embroidery: on both ends of every straight line, add two pairs of short diagonal stitches pointing toward the spoke tip. Keep the longest branches approximately 1 cm long and avoid pulling the fabric inward.
- Slide the finished sleeve onto the lower portion of the cylinder. Tie a burgundy ribbon bow at its upper front edge and sew two small bells beneath the knot. Keep all fabric below the glass rim and place only a battery-operated LED candle inside.
Layered Poinsettia Flowers
- Make one cream flower and one burgundy flower with the 3.5 mm hook. Each flower uses five large petals and five small petals in its own color.
- Large petal, first side: ch 13. Starting in the second chain from the hook, work sc, hdc, dc in the next 2 chains, tr in the next 4 chains, dc in the next 2 chains, hdc, then 3 sc in the last chain.
- Large petal, second side: along the underside of the foundation chain, work hdc, dc in the next 2 chains, tr in the next 4 chains, dc in the next 2 chains, hdc, then sc in the final chain. Join to the first sc. (25 stitches around the petal)
- Large petal edging: ch 1, sc in each of the next 12 stitches, 3 sc in the next stitch, then sc in the remaining 12 stitches. Join and fasten off, leaving a sewing tail. (27)
- Small petal, first side: ch 10. Starting in the second chain from the hook, work sc, hdc, dc in the next 2 chains, tr, dc in the next 2 chains, hdc, then 3 sc in the last chain.
- Small petal, second side: along the underside, work hdc, dc in the next 2 chains, tr, dc in the next 2 chains, hdc, then sc in the final chain. Join and fasten off with a sewing tail. (19)
- Pinch the first and last stitches of each petal together at its starting end and secure with two small stitches. The rounded three-stitch end forms the outer tip; the pinched end becomes the flower center.
- For each flower, overlap five large petal bases into a ring and sew them together. Add five small petals above them, offset between the lower petals. Sew through all layers at the center.
- Sew six gold beads in a tight cluster at each flower center. Shape the petals by hand; finished flowers should measure approximately 13–16 cm across.
Foliage Leaves — Make Eight
- Use the 3.0 mm hook. Make four leaves in forest green and four in olive green. Ch 11.
- First side: starting in the second chain from the hook, work sc, hdc, dc in the next 2 chains, tr in the next 2 chains, dc in the next 2 chains, hdc, then 3 sc in the last chain.
- Second side: along the underside, work hdc, dc in the next 2 chains, tr in the next 2 chains, dc in the next 2 chains, hdc, then sc in the final chain. Join to the first sc. (21)
- Fasten off with a sewing tail. Embroider a central vein from base to tip using the other green shade, then add three short diagonal veins on each side.
- Block the leaves lightly, keeping a shallow fold along each central vein. Arrange four beneath each flower, with their tips visible beyond the petals.
Finishing and Centerpiece Assembly
- Place the dry mat on a level surface and choose one scallop as the front center. Set the large tree at the rear center, approximately 9 cm behind the mat’s center. Place the medium tree to the left and the small tree to the right, with their bases sitting entirely inside the scalloped edge.
- Place the sleeved cylinder at the mat’s center, slightly forward of the large tree. Leave at least 1 cm between the sleeve and adjacent crochet pieces so the glass can lift out freely.
- Seat one fox at each front side of the cylinder, with both faces turned slightly toward the center. Arrange their tails along the outside edges of their bodies.
- Position the cream poinsettia at the front left and the burgundy poinsettia at the front right. Slide their leaves underneath, keeping the front scallops visible.
- Remove the glass temporarily. For a fixed arrangement, sew each tree base to the mat at six evenly spaced points, each fox at four underside points, and each flower through its central base. Sew each leaf at its base and midpoint. Do not sew across the cylinder’s standing area.
- If using pinecones or artificial berries, tie them into two removable clusters with strong thread and nestle one beside each flower. Remove these clusters before cleaning. Keep their weight supported by the tabletop beneath the mat.
- Weave in all ends securely, return the cylinder to its space, and insert the LED candle. Check that every piece stands evenly and the glass can be removed without catching a bow, bead, or petal.
Take a moment to turn the fox faces toward the room and spread the flower petals. Those small adjustments give the finished display its welcoming woodland character.
Store the ensemble flat in a roomy box, supporting the trees and flowers with tissue. Remove the glass, LED candle, and loose natural accents before packing or cleaning.
Tips for Success
- Complete the tree skirts before stuffing the cones; the reserved loops are easier to reach while the fabric is flexible.
- Check the mat on a flat surface after every second increase round. If it cups or ripples, correct the gauge before adding the scallops.
- Keep the tree disks slightly firm and their undersides flat. Too much stuffing beneath the center makes the trees rock.
- Pin all fox features before sewing. Matching the muzzle height and eye spacing gives the pair a consistent expression.
- Embroider the candle sleeve before adding its bow, and check its fit on the actual cylinder after embroidery.
Common Mistakes to Avoid
- Working through both loops on a tree attachment round hides the skirt foundation. Mark every designated BLO round before starting it.
- Counting turning chains as stitches adds unwanted width. Starting chains do not count anywhere in this pattern.
- Putting the mat’s three-stitch border increase away from a shell center twists the scallop. Count four shell stitches before the center stitch.
- Overstuffing the tails makes them resist their curves. Use moderate filling and secure each curved tail to the fox at three points.
- Using a burning candle introduces heat beside yarn and ribbon. Keep this arrangement exclusively for a battery-operated LED candle.
Ways to Customize This Pattern
- Replace burgundy with cranberry or deep plum, keeping cream snow and dark green trees for the same strong contrast.
- For a bead-free version, embroider gold French knots on the trees and make six small gold satin-stitch dots at each flower center.
- Make a larger mat by adding two increase rounds before its plain sc round: work 15 dc then an increase twelve times for 204 stitches, followed by 16 dc then an increase twelve times for 216 stitches. Work 27 eight-stitch scallop repeats around that edge.
- For a smaller display, use only the medium tree, one fox, and one flower while retaining the original mat as a generous frame.
- Keep the trees and foxes removable by omitting their attachment stitches and arranging them separately each season; store the small decorative accents in a labeled pouch.
Frequently asked questions
It is a Christmas home decor centerpiece. The two fox ornaments use amigurumi construction, while the complete project also includes a display mat, shaped trees, flowers, foliage, and an LED candle sleeve.
Measure around the glass where the sleeve will sit. Crochet a foundation chain in a multiple of four that matches that measurement without stretching. Join it and work the first sc round, then test the fit before continuing. Adjust the plain cream rounds to change the height, keeping the finished sleeve below the rim.
Yes, but all dimensions and yarn quantities will change. Use the same weight throughout the ensemble, choose a firm hook for the stuffed pieces, and make fresh gauge swatches. Recalculate the sleeve foundation around the actual glass rather than relying on the original 44 stitches.
Remove the glass, LED candle, and removable accents. Spot-clean the crochet with a mild solution suitable for your yarn, blot with a towel, and dry flat with the trees supported upright. Avoid soaking attached bells, ribbon, beads, or natural pinecones.
The finished Woodland Christmas Crochet Centerpiece with Trees and Foxes